TM 9-2320-280-34
19-3. DIFFERENTIAL REPAIR (Cont'd)
45.
Lubricate front pinion bearing (2) and seal (1) with lubricating oil. Using yoke seal installer, install
front pinion bearing (2) and seal (1) in housing (3).
46.
Rotate housing (3) 180 degrees. Lubricate outside diameter of rear pinion bearing cup (4) with
lubricating oil.
NOTE
If pinion shim is beveled, be sure beveled side faces bottom of
bearing cup bore.
47.
Using driver handle and rear pinion bearing cup installer, install correct thickness pinion shim (5)
and rear pinion bearing cup (4) in housing (3).
YOKE SEAL
DRIVER
INSTALLER
HANDLE
1
REAR PINION
BEARING CUP
INSTALLER
2
4
5
3
3
19-20
Change 2
