TM 9-2320-280-34
This task covers:
Inspection
INITIAL SETUP:
Applicable Models
Equipment Condition
M997A2, M1025A2, M1035A2,
Transmission disassembled into subassemblies
M1043A2, M1045A2, M1097A2, M1123
Manual References
Maintenance Level
TM 9-2320-280-24P
General support
Inspection
NOTE
Return spring is part of transmission.
1.
Inspect parking lock pawl (2) for cracks and burrs. Replace if cracked and remove any minor burrs.
2.
Inspect pawl shaft (1) for cracks, burrs, and damaged flats. Remove minor burrs. Replace if damaged.
3.
Inspect detent lever (3) and manual shaft (5) for cracks, burrs, and damaged threads. Replace if
damaged.
4.
Inspect actuator assembly (6) for cracks, burrs, free movement, and damaged spring. Replace if
damaged.
5.
Inspect return spring (7) for breaks and distortion. Replace if damaged.
6.
Inspect retaining pin (4) for tightness. Replace if damaged.
Change 1
