TM 9-2320-280-34
This task covers:
a. Cleaning
b. Inspection
INITIAL SETUP:
Equipment Condition
Applicable Models
M997A2, M1025A2, M1035A2,
Transmission disassembled into subassemblies
M1043A2, M1045A2, M1097A2, M1123
Manual References
Maintenance Level
General support
TM 9-2320-280-24P
a. Cleaning
NOTE
Have drainage container ready to catch fluid.
1.
abnormal looseness or noises were recorded at torque converter removal (para. 17-14a).
2.
Clean exterior of torque converter (1) in accordance with para. 2-13.
b. Inspection
NOTE
For general inspection instructions, refer to para. 2-14.
1.
2.
Inspect torque converter (1) for proper operation by manually rotating splined inner race (3) in both
directions. The splined inner race (3) should turn freely in clockwise direction, but not turn or be
very difficult to turn, in counterclockwise direction. Replace torque converter (1) if it does not
operate properly.
3.
Inspect torque converter (1) for damaged or leaking seams and welds. Replace torque converter (1) if
damaged.
4.
5.
Inspect threaded holes (4) for damage. Repair with thread repair inserts. If unable to repair
threaded holes (4), replace torque converter (1).
Change 1
