TM 9-2320-280-34
14-5. WINDSHIELD MAINTENANCE
This task covers:
a. Removal
c. Assembly
b. Disassembly
d. Installation
INITIAL SETUP:
Applicable Models
Personnel Required
All except M996, M996A1, M997, M997A1,
One mechanic
M997A2, M998, M998A1, M1035, M1035A1,
One assistant
M1035A2, M1037, M1038, M1038A1,
Manual References
M1042, M1097, M1097A1, M1097A2
TM 9-2320-280-20
Tools
TM 9-2320-280-24P
General mechanic's tool kit:
Equipment Condition
automotive (Appendix G, Item 1)
Wiper arms removed (TM 9-2320-280-20).
Materials/Parts
Left defroster nozzle removed
Four locknuts (Appendix E, Item 63)
(TM 9-2320-280-20).
Assembled locknut (Appendix E, Item 85)
Maintenance Level
Six lockwashers (Appendix E, Item 88)
Direct support
Twenty-seven blind rivets
(Appendix E, Item 197)
a. Removal
1.
Remove six capscrews (13) from two rear windshield mounting brackets (12) and windshield (3).
Remove shims (14) from behind mounting brackets (12), if present.
2.
Remove two locknuts (7), washers (6), capscrews (4), washers (6), and ring front supports (5) from
windshield clevises (8). Discard locknuts (7).
3.
Remove two locknuts (11), studs (10), washers (9), snubber plates (1), mounts (15), bushings (16),
mounts (15), snubber plates (1), and front roof mount plates (2) from windshield support
mounts (17). Discard locknuts (11).
Change 2
