TM 9-2320-280-34
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Equipment Condition
General mechanic's tool kit:
Wheel removed (TM 9-2320-280-20).
automotive (Appendix G, Item 1)
Maintenance Level
Manual References
Direct support
TM 9-2320-280-20
TM 9-2320-280-24P
a. Removal
1.
Remove four nuts (1), washers (2), capscrews (7), and washers (2), from tiedown bracket (3) and
frame rail (10).
2.
Remove two nuts (8), washers (4), capscrews (5), washers (4), vent tube mounting bracket (6), and
tiedown bracket (3) from rear suspension front crossmember mounting bracket (9).
b. Installation
1.
Install tiedown bracket (3) on frame rail (10) with four washers (2), capscrews (7), washers (2), and
nuts (1). Tighten nuts (1) to 260 lb-ft (353 Nm).
2.
Install tiedown bracket (3) and vent tube mounting bracket (6) on rear suspension front
crossmember mounting bracket (9) with two washers (4), capscrews (5), washers (4), and nuts (8).
Tighten nuts (8) to 90 lb-ft (122 Nm).
Change 2
