TM 9-2320-280-34
This task covers:
a. Removal
b
Installation
INITIAL SETUP:
Applicable Models
Manual References
M1097, "A1" and "A2" series
TM 9-2320-280-24P
Tools
Maintenance Level
General mechanic's tool kit:
Direct support
automotive (Appendix G, Item 1)
Materials/Parts
Lockwasher (Appendix E, Item 119)
a. Removal
1.
Remove nut (9), washer (10), capscrew (15), and washer (14) from muffler mounting bracket (2) and
guide cable bracket (3).
2.
Remove nut (11) and guide cable bracket (3) from capscrew (13) on transfer case (1).
3.
Remove capscrew (4), lockwasher (5), washer (6), guide cable (8), and support bracket (7) from
frame (12). Discard lockwasher (5).
4.
Remove nut (19), washer (18), guide cable (8), and washer (18) from stud (17) on crossmember (16).
b. Installation
1.
Install guide cable bracket (3) on muffler mounting bracket (2) with capscrew (15), washer (14),
washer (10), and nut (9).
2.
Install guide cable bracket (3) on capscrew (13) with nut (11). Tighten nut (11) to 16-18 lb-ft
(22-24 Nm).
3.
Install guide cable (8) and support bracket (7) on left hand frame (12) with washer (6), lockwasher (5),
and capscrew (4). Tighten screw (4) to 30 lb-ft (41 Nm).
4.
Install washer (18) and guide cable (8) on stud (17) and crossmember (16) with washer (18) and
nut (19). Tighten nut (19) to 60 lb-ft (81 Nm).
Change 2
