TM 9-2320-280-34
8-3. TRANSFER CASE REPLACEMENT (Cont'd)
9.
Connect vent line (4) to transfer case (6) and bracket (3) with vent line clamp (2) and capscrew (1).
10.
Install speedometer cable (7) in bracket (8) and connect 90 degree speedometer adapter (5) to
transfer case (6).
11.
Connect cooler lines (9) to transfer case (6) with two hose clamps (10).
12.
Connect front propeller shaft (14) on transfer case yoke (11) with two straps (12) and four
capscrews (13). Tighten capscrews (13) to 13-18 lb-ft (18-24 Nm).
13.
Connect rear propeller shaft (19) on transfer case yoke (17) with two U-bolts (18), four
lockwashers (16), and nuts (15). Tighten nuts (15) to 21 lb-ft (28 Nm).
8-6
Change 2
