TM 9-2320-280-34
6-9. BODY WIRING HARNESS REPLACEMENT (Cont'd)
49.
Remove two screws (9), clamps (8), and harness (17) from body (10).
50.
Remove capscrew (13), assembled locknut (12), clamp (11), and harness (17) from body (10). Discard
assembled locknut (12).
51.
Remove two screws (27), lockwashers (28), and shield (1) from body (10). Discard lockwashers (28).
52.
Remove two capscrews (2), assembled locknuts (14), clamps (22), and harness (17) from shield (1).
Discard assembled locknuts (14).
53.
Disconnect harness lead 489B (29) at right rear side marker light (33).
54.
Disconnect harness leads 21E (18), 22-460C (19), 23D (20), and 24C (21) from right rear composite
light (7).
NOTE
Perform step 55 for M1035, M1035A1, and M1035A2 only.
55.
Disconnect harness lead 467F (26) from backup light (15), remove nut (25), lockwasher (24), and
ground lead 95H (23) from stud (16). Discard lockwasher (24).
2
1
7
8
4
6
3
5
~
9
33
19 18
20
11
17
12
21
14
10
31
13
30
29
15
32
23
16
22
24
25
28
27
26
6-94
Change 2
