TM 9-2320-280-34
6-3.1. 100 AMPERE ALTERNATOR (12340912) REPAIR (Cont'd)
CAUTION
During assembly of stator and drive end housing, do not rest stator
on winding end turns.
17.
Align scribe marks (16) on drive end housing (7) and stator (18) and install stator (18) on drive end
housing (7).
18.
Connect large electrical connector lead (17) and three stator leads (20) to three rectifier mounts (6)
with three screws (19).
19.
Apply sealant to three screws (19), connections of stator leads (20) and rectifier mounts (6).
20.
Install seal sleeve tool into seal (15).
21.
Align scribe marks (21) on end housing (22) and stator (18).
22.
Install rotor (23) and end housing (22) into stator (18) and drive end housing (7) until seal sleeve tool
is forced out of seal (15).
23.
Secure end housing (22) and stator (18) on drive end housing (7) with four screws (24).
Change 1
6-18.13
