TM 9-2320-280-34
3-26. ENGINE PREPARATION (6.2 L AND 6.5 L) (Cont'd)
WARNING
Power steering pump must be supported during removal and
installation. Failure to do this may cause injury to personnel.
NOTE
Perform steps 43 through 46 for all vehicles except M997A2, M1025A2,
M1035A2, M1043A2, M1045A2, M1097A2, and M1123 vehicles.
Perform steps 46.1 and 46.2 for 6.5 L configuration.
43.
Remove capscrew (9) and lockwasher (10) from power steering bracket (11) and alternator
bracket (13). Discard lockwasher (10).
44.
Remove adjusting capscrew (19), lockwasher (18), and washer (17) from power steering bracket
(11). Discard lockwasher (18).
45.
Remove power steering pump assembly (12).
46.
Remove two nuts (16) and front support bracket (15) from water pump housing (14).
46.1.
Remove capscrew (20) and two capscrews (21) from power steering pump (12) and alternator
bracket (13).
46.2.
Remove power steering pump (12) from alternator bracket (13).
6.5L
CONFIGURATION
3-183
