TM 9-2320-280-34
3-26. ENGINE PREPARATION (6.2 L AND 6.5 L)
WARNING
Alternator must be supported during removal. Failure to
support alternator may cause injury to personnel or damage to
equipment.
NOTE
Perform steps 37 through 40 for vehicles equipped with 60 and 100
amp Prestolite alternators only.
37.
Remove capscrew (15), lockwasher (14), and washer (13), from alternator (20) and adjusting bracket
(12). Discard lockwasher (14).
38.
Remove two capscrews (16), lockwashers (17), and washers (18) from alternator (20), support
bracket (19) and mounting bracket (10). Discard lockwashers (17).
NOTE
Perform step 39 for vehicles with new alternator support bracket
configuration.
In some cases, a thru-bolt and nut may be present on mounting
bracket instead of standard capscrews and washers.
39.
Remove two capscrews (16), lockwashers (17), washers (18), spacer (22), and power steering lines
bracket (21) from support bracket (19) and mounting bracket (10). Discard lockwashers (17).
40.
Remove alternator (20).
3-181
