TM 9-2320-280-34
3-24. ENGINE REMOVAL (6.5 L) (Cont'd)
9.
Remove four screws (20) and lockwashers (20.1) connecting connector receptacle (21) to
bracket (19).
10.
Loosen rear receptacle cover (22) and slide wires of receptacle (21) out through slot in bracket (19).
11.
Remove assembled locknut (26), screw (24), and harness and clamp (25) from left splash shield (9).
Discard assembled locknut (26).
12.
Remove locknut (23), washer (16), capscrew (17), washer (16), and left splash shield (9) from
support bracket (18). Discard locknut (23).
13.
Remove locknut (4), washer (5), washer (6), capscrew (13), and washer (5) from left splash shield (9)
and airlift bracket (3). Discard locknut (4).
14.
Remove capscrew (14), washer (15), and left splash shield (9) from airlift bracket (3).
15.
Remove locknut (7), washer (8), capscrew (12), washer (11), and left splash shield (9) from
bracket (10). Discard locknut (7).
5
4
7
6
8
3
9
10
11
12
23
16
5
15
3
13
16
14
18
17
19
22
19
22
20
21
20.1
21
3-117
