TM 9-2320-280-34
3-24. ENGINE REMOVAL (6.5 L) (Cont' )
d
23.
Loosen clamp (1) and disconnect radiator inlet hose (2) from engine.
24.
Loosen clamp (5) and disconnect surge tank-to-radiator vent hose (4) from adapter (6).
25.
Loosen clamp (15) and disconnect control valve hose (14) from bulkhead adapter (16).
26.
Disconnect fan drive hose quick disconnect (17) from fan drive (18).
27.
Loosen clamp (9) and disconnect lower radiator front hose (10) from radiator (3).
28.
Remove locknut (28), washer (29), capscrew (34), wash r (33), large washer (32), and lower
e
mount (30), from frame bracket (31). Discard locknut (28).
29.
Remove four locknuts (11), washers (12), capscrews (13) and two brackets (8) from airlift bracket (7).
Discard locknuts (11).
WARNING
Do not drain engine oil when engine is hot. Severe injury to per-
sonnel will result.
CAUTION
Cover or plug all hoses and connections immediately after discon-
nection to prevent contamination.
NOTE
Have drainage container ready to catch oil.
30.
Disconnect engine oil cooler supply and return lines (22) from engine oil cooler ports (21).
31.
Loosen two clamps (26) and disconnect power steering hoses (24) and (25) from radiator (3).
32.
Loosen hose clamps (19) and disconnect transmission oil cooler line connector hoses (23) from
transmission oil cooler ports (20).
33.
Lift up radiator (3) and fan shroud and oil cooler assembly (27) and remove from vehicle.
3-120
