TM 9-2320-280-34
3-21.1. ENGINE REPLACEMENT IN SHIPPING/STORAGE CONTAINER (Cont'd)
6.
Remove two capscrews (24) and engine lifting sling from right cylinder head (23).
7.
Remove two capscrews (22) and sling bracket from left cylinder head (20).
8.
Visually check humidity indicator (17) for discolorization. If indicator (17) is dark purple, replace
desiccant (3).
NOTE
Ensure gasket is seated properly.
9.
Position upper container (4) using alignment pins (15) on gasket (10) and lower container (13).
10.
Install upper container (4) on lower container (13) with twenty-six capscrews (16), washers (18), and
nuts (19).
FRONT RIGHT
3-45
