TM 9-2320-280-34
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
___ls
Too_
Manual_R_fe__n_es
______ _e _ re_c __
General mechanic's tool kit:
TM 9-2320-280-10
automotive (Appendix G, Item 1)
TM 9-2320-280-20
TM 9-2320-280-24P
__at__ial_/____s
M _ er__s Part _
TM 9-2815-237-34P
Sealing compound (Appendix B, Item 53)
____pm_________i__
Equi __ ent Condit on
Hood raised and secured (TM 9-2320-280-10).
Mai__enance_Level
___ nt _____ ____
Direct support
a. Removal
1.
Loosen four capscrews (3) connecting crankshaft pulley (1) to torsional damper (2).
NOTE
Perform steps 2 and 3 for vehicles with 6.2L engines only.
Perform steps 4 and 5 for vehicles with 6.5L engines only.
2.
Remove power steering belts (TM 9-2320-280-20).
3.
Remove four capscrews (3) and crankshaft pulley (1) from torsional damper (2).
4.
Remove serpentine belt (TM 9-2320-280-20).
5.
Remove four capscrews (3), mud shield (4), crankshaft pulley (1), and spacer (5) from torsional
damper (2).
b. Installation
NOTE
Perform steps 1 through 4 for vehicles with 6.2L engines only.
Perform steps 5 through 8 for vehicles with 6.5L engines only.
1.
Apply sealing compound to four capscrews (3).
2.
Install crankshaft pulley (1) on torsional damper (2) with four capscrews (3).
3.
Install power steering belts (TM 9-2320-280-20).
4.
Tighten four capscrews (3) to 48 lb-ft (65 Nm).
5.
Apply sealing compound to four capscrews (3).
6.
Install spacer (5), crankshaft pulley (1), and mud shield (4) on torsional damper (2) with four
capscrews (3).
7.
Install serpentine belt (TM 9-2320-280-20).
8.
Tighten four capscrews (3) to 48 lb-ft (65 Nm).
Change 1
