TM 9-2320-280-34
3-5. RIGHT CYLINDER HEAD REPLACEMENT (Cont'd)
NOTE
Use of cylinder head lifting device is optional.
3.1. Install cylinder head lifting device on center of cylinder head (4) with two washers (4.2) and
capscrews (4.1).
4. Using hoist or other lifting equipment, remove cylinder head (4).
4.1. Remove and discard gasket (7).
4.2. Remove two capscrews (4.1), washers (4.2), and cylinder head lifting device from cylinder head (4),
if installed.
5. For cylinder head (4) and valve repair procedures, refer to TM 9-2815-237-34.
Change 1
3-12.1