TM 9-2320-266-34
v. Fill the transfer case to the proper level with specified
lubricant and install the filler plug.
w. Carefully check the transfer case for leaks. If leakage
is visible at any bolt head, remove the bolt, clean and recoat
it with a suitable sealant coating, and reinstall.
Figure 17-15 Range Box Positioned for Asembly.
Figure 17-I7. Installing Intermediate Housing on Range
Box.
Table 17-1. Torque Specifications
31
Adapter to transmission attaching bolt
30
Adapter to transfer case attaching bolts
Range box to chain case
30
Differential housing to chain case
30
Front input bearing retainer bolts
20
Front output front bearing retainer bolts
30
Front output rear bearing retainer bolts
30
55
Differential carrier bolt
Rear out put bearing retainer assembly
30
bolts
Output shaft yoke nuts
120
20
Lockout shift poppet plug
Range shift poppet plug
20
Power take-off cover bolts
15
Shifter assembly to adapter bolts
30
Shift lever to shifter assembly nut
30
Knob assembly jam nut
10
Range and locknut shift lever locknut
20
Figure 17-16 Shift Rail Installed Position
Swivel rod clamp lockscrews
Filler plug
30
17-9/17-10 (blank)
Change 6
