TM 11-7440-284-14
4-77. REMOVING FRONT ANTENNA MOUNTING BRACKETS.
This task covers:
Removal
INITIAL SETUP
Personnel Required
Tools
Two mechanics
7/16-inch box wrench (2 required)
Equipment Condition
Materials/Parts
Antenna support assemblies removed,
None
see paragraph 4-76.
ACTION
REMARKS
ITEM
LOCATION
NOTE
A helper will be needed outside carrier.
Using two 7/16-inch box wrenches, remove.
Screw (1), flat
1. Outside carrier
washer (2), flat
forward curbside
There are 16 screws. Step 1
washer (3) and
wall
is typical for all 16 screws.
nut (4)
Do step 1 again.
2.
Screws (5)
Remove.
Antenna
3.
bracket (6)
Do steps 1, 2 and 3 again.
Antenna
4. Outside carrier
bracket (6)
forward roadside
wall
See paragraph 4-15 for installation.
Antenna
5. Outside carrier
brackets (6)
forward curbside
and roadside wall
4-150
