TM 11-7440-284-14
4-75. REMOVING ANTENNA MOUNTING BASES.
This task covers:
Removal
INITIAL SETUP
Tools
Personnel Required
One mechanic
9/16-inch box wrench (2 required)
Materials/Parts
Equipment Condition
Antenna masts removed, see
None
ACTION
ITEM
REMARKS
LOCATION
NOTE
There are two VRC antenna mounting bases, and one GR anten-
na mounting base. The steps given are typical for both types.
Using two 9/16-inch box wrenches, remove.
1. Antenna supports
Screw (1), flat
There are four screws. Step 1 is
washer (2), lock-
washer (3) and
typical for all four screws.
nut (4)
Do step 1 again.
2.
Screws (1)
Remove.
Antenna mounting
3.
base (5)
Antenna mounting
See paragraph 4-17 for installation.
4.
base (5)
4-146
