TM 11-7440-284-14
4-76. REMOVING FRONT ANTENNA SUPPORTS.
This task covers:
Removal
INITIAL SETUP
Personnel Required
Tools
One mechanic
7/16-inch box wrench (2 required)
Equipment Condition
Materials/Parts
Antenna mounting bases removed,
None
see paragraph 4-75.
ACTION
REMARKS
ITEM
LOCATION
Using two 7/16-inch box wrenches, remove.
Screw (1), IET
1. Front curbside
There are six screws. Step 1 is
Iockwasher (2),
antenna mounting
typical for all six screws.
IET Iockwasher
bracket
(3) and nut (4)
Do step 1 again.
Screws (1)
2.
Remove.
Roadside antenna
3.
support (5)
Do steps 1, 2 and 3 for
curbside support assembly.
Do steps 1, 2 and 3 again.
Curbside antenna
4. Front roadside
support (5)
antenna mounting
bracket
See paragraph 4-16 for installation.
Antenna Supports (5)
5. Front curbside and
roadside antenna
mounting brackets
4-148
