TM 11-7440-284-14
4-15. INSTALLING FRONT ANTENNA SUPPORTS.
This task covers:
Installation
INITIAL SETUP
Personnel Required
Tools
One mechanic
7/16-inch box end wrench
(2 required)
Equipment Condition
Materials/Parts
Front antenna brackets installed.
1/4-20 x 3/4 inch long hex head
screw (12 required)
1/4-20 plain hex nut
(12 required)
14-inch IET Iockwasher
(12 required)
Support assembly (2 required)
ACTION
REMARKS
ITEM
LOCATION
NOTE
Support assemblies face front of vehicle.
Place and aline holes.
1. Curbside antenna
Support (1) and
bracket (2)
bracket
2.
Install,
handtighten.
Screw (3), IET
There are six screws. Step 2 is
Iockwasher (4),
Iockwasher (5)
typical for all six screws.
and nut (6)
3.
Holes (7)
Do step 2 again.
Using two 7/16-inch box wrenches, tighten.
Screws (3)
4.
Do steps 1 through 4 for roadside
antenna bracket.
4-24
