TM 11-7440-284-14
4-78. REMOVING REAR ANTENNA MOUNTING BRACKET.
This task covers:
Removal
INITIAL SETUP
Personnel Required
Tools
Two mechanics
3/8-inch drive, 6 inch long
extension bar
Equipment Condition
3/8-inch drive socket wrench
9/16-inch socket
Antenna mounting base removed,
9/16-inch box wrench
see paragraph 4-77.
Cross-tip screwdriver
Materials/Parts
None
ACTION
REMARKS
ITEM
LOCATION
Screw (1)
Using cross-tip screwdriver, remove.
1. Below rear curbside
There are four screws. Step 1 is
carrier seat
typical for all four screws.
Do step 1 again.
Screws (2)
2.
Remove.
Plate (3)
3.
Save.
Using ratchet wrench, extension, 9/16-inch
Screw (4), flat
4. Above rear curbside
washer (5), flat
socket and 9/16-inch box wrench, remove.
carrier seat
There are two screws. Step 4 is
washer (6) and
typical for both screws.
nut (7)
Do step 4 again.
Screw (8)
5.
4-152
