TM 11-7440-284-14
4-67. REMOVING ELECTRONIC EQUIPMENT TABLE.
This task covers:
Removal
INITIAL SETUP
Tools
Equipment Condition
Tacfire components removed, see
1/2-inch box wrench (2 required)
Materials/Parts
ELP rack removed, see paragraph 4-63.
MEG rack removed, see paragraph 4-64.
None
KG rack removed, see paragraph 4-65.
Front reinforcement support removed,
Personnel Required
see paragraph 4-66.
Two mechanics
ACTION
ITEM
REMARKS
LOCATION
1. Top of radio
Screw (1), flat
Using two 1/2-inch box wrenches, remove.
mount
washer (2), flat
There are eight screws. Step 1
is typical for all eight
washer (3) and
nut (4)
screws.
2.
Do step 1 again.
Screws (5)
WARNING
A helper will be needed to lift and remove electronic
equipment table.
3.
Remove.
Electronic equip-
ment table (6)
See paragraph 4-27 for
installation.
4-130
