TM 11-7440-284-14
4-66. REMOVING FRONT REINFORCEMENT SUPPORT.
This task covers:
Removal
INITIAL SETUP
Personnel Required
Tools
One mechanic
7/16-inch box wrench (2 required)
1/2-inch box wrench (2 required)
Equipment Condition
Materials/Parts
Tacfire racks removed. (See
None
ACTION
REMARKS
ITEM
LOCATION
Using two 7/16-inch box wrenches, remove.
1. Front carrier wall
Screw (1), flat
There are six screws. Step 1
washer (2), flat
is typical for all six screws.
washer (3), lock-
washer (4) and
nut (5)
2.
Screws (6)
Do step 1 again.
3. Front of elec-
Using two 1/2-inch box wrenches, remove.
Screw (7), flat
tronic equip-
washer (8), flat
There are four screws. Step 3
ment table
is typical for all four screws.
washer (9) and
nut (10)
4.
Do step 3 again.
Screws (11)
5.
Front reinforce-
Remove.
See paragraph 4-28 for
ment support (12)
installation.
4-128
