TM 11-7440-284-14
4-64. REMOVING MESSAGE ENTRY GROUP RACK.
This task covers:
Removal
INITIAL SETUP
Tools
Personnel Required
1/2-inch box wrench (2 required)
One mechanic
Materials/Parts
Equipment Condition
None
Tacfire components removed, see
ACTION
LOCATION
ITEM
REMARKS
Center position
Screw (1), flat
1.
Using two 1/2-inch box wrenches, remove.
top of electronic
washer (2), flat
There are four screws. Step 1
equipment table
washer (3) and
is typical for all four screws.
nut (4)
2.
Screws (5)
Do step 1 again.
MEG rack (6)
3.
Remove.
See paragraph 4-30 for
installation.
4-124
