TM 11-7440-284-14
4-69. REMOVING SUBMOUNT ASSEMBLY.
This task covers:
Removal
INITIAL SETUP
Personnel Required
Tools
Two mechanics
1/2-inch box wrench (2 required)
Equipment Condition
Materials/Parts
Radio mount removed, see
None
ACTION
REMARKS
ITEM
LOCATION
NOTE
A helper will be needed outside carrier.
Using two 1/2-inch box wrenches, remove.
Screw (1), flat
1. Inside carrier,
There are two screws. Step 1
washer (2), flat
forward section
is typical for both screws.
washer (3) and
nut (4)
Do step 1 again.
2.
Screws (5)
Do steps 1 and 2 again.
Brackets (6)
3.
There are four brackets.
A helper will be needed to lift and remove submount.
Remove.
Submount (7)
4.
See paragraph 4-23 for
installation.
4-134
