TM 11-7440-284-14
4-25. PREPARATION FOR DRILLING FRONT REINFORCEMENT SUPPORT MOUNTING HOLES. (CONT)
ACTION
REMARKS
ITEM
LOCATION
Using two 1/2-inch box wrenches, remove.
Screw (1),
1 9 . Electronic
There are four screws. Step 19 is
flat washer (2),
equipment table
typical for all four screws.
flat washer (3)
and nut (4)
Do step 19 again.
Screws (5)
20.
Remove.
Electronic equip-
21.
ment table (6)
4-51
