TM 11-7440-284-14
4.25. PREPARATION FOR DRILLING FRONT REINFORCEMENT SUPPORT MOUNTING HOLES. (CONT)
ACTION
REMARKS
ITEM
LOCATION
Using two 7/16-inch box wrenches, remove.
Screw (1),
Front reinforcement
14.
There are two screws. Step 14 is
flat washer (2),
support
typical for both screws.
flat washer (3)
and nut (4)
Do step 14 again.
Screws (5)
15.
Using two 1/2-inch box wrenches, remove.
Screw (6),
16.
There are four screws. Step 16 is
flat washer (7),
typical for all four screws.
flat washer (8)
and nut (9)
Do step 16 again.
17.
Screws (10)
Remove.
Reinforcement
18. Forward carrier
support (11)
wall
4-50
