TM 9-2320-289-34
3-7. CYLINDER HEAD REMOVAL (Cont).
7.
If prechamber (9) is cracked or
damaged, remove fuel injector nozzle
and gasket on same cylinder as
prechamber.
Remove
old
prechamber by placing punch into
fuel injector nozzle hole and lightly
tapping with hammer. Install new
prechamber by aligning
locator
notches (13) on prechamber and
cylinder head (5). Using a 11/4 in.
socket and light mallet, tap into
place. Repeat measurements in step
6, then install new gasket and fuel
injector nozzle.
FOLLOW-ON TASKS:
l Install cylinder head. (See paragraph 3-25)
TA50635
3-23