TM 9-2320-289-34
8-4.
POWER STEERING GEAR REPAIR (Con’t).
18.
Install adjuster plug (17) into housing (7), DO NOT tighten.
19.
Adjust bearing preload.
(a) Using spanner wrench, tighten adjuster plug (17) clockwise until adjuster plug is firmly
bottomed.
(b) Mark housing (7) and face of adjuster plug (17), Measure back counterclockwise 1/2 in.
(12.7 mm) and place a second mark on housing,
TA50495
8-26
