TM 9-2320-289-34
5-22.
TRANSFER CASE MAINTENANCE (M1028A1 AND M1031) (Con’t).
WARNING
Transfer case (1) is heavy. Provide suitable support and use caution
during removal. Failure to follow this warning may result in damage to
transfer case or serious injury to personnel.
4 .
Place a suitable jack under transfer case (1). Remove 8 bolts (11) and Iockwashers (14), and
move transfer case rearward until free of transmission output shaft (8) and transfer case
adapter (10). Remove transfer case, Discard Iockwashers.
5 .
Remove transfer case adapter gasket (16) and discard.
6 .
Remove 2 bolts (22), lower transmission mounts (21), and spacers (20) from underside of
transmission support (19).
CAUTION
Transmission should be supported before removing transfer case adapter
(10). Failure to follow this caution may result in damage to transmission.
NOTE
If transmission is to be removed, transmission should be supported with
transmission lift.
7 .
Raise transmission 1/2 in. (1 2.7 mm) and remove 6 bolts (13) and Iockwashers (12). Remove
transfer case adapter (10), Remove 2 upper transmission mounts (18) and 2 left transfer case
shield bolts (26). Discard Iockwashers.
8 .
Remove 2 transfer case adapter seals (9 and 15) from transfer case adapter (10). Discard
seals.
5-163
