TM 9-2320-289-34
5-22.
TRANSFER CASE MAINTENANCE (M1028A1 AND M1031) (Con’t).
5.
Remove 5 bolts (34) and extension
(27) from retainer (29). Remove
gasket and discard. If damaged,
remove extension bushing. Remove
vent (28).
6.
Remove selective snapring (36) and
bearing (38) from rear output shaft
(37). Remove snapring (39) from
bearing. Remove speedometer drive
gear (41) from rear output shaft.
NOTE
46 rear output shaft roller bearings
(43) may fall out of race (42) when
retainer (29) is removed. Ensure
that all are present,
7.
Remove 8 bolts (40) and retainer
(29) from transfer case (1). Remove
gasket and discard. Remove 46 roller
bearings (43). Remove race (42) if
damaged.
5-165
