TM 9-2320-289-34
5-13.
INSTALLING AND REMOVING TRANSMISSION FROM HOLDING FIXTURE
(Con’t).
b. REMOVAL
WARNING
Transmission (2) is heavy. Use caution and provide support when
removing it from holding fixture (1), Failure to follow this warning may
result in serious injury to personnel or damage to transmission.
NOTE
Ensure that transmission oil pan bolts are fully tightened. (See
TM 9-2320-289-20)
1.
Remove pin (4). Loosen screw (3) until holding fixture (1) slides in holding fixture base (5).
2.
Remove transmission (2) and holding fixture (1) from holding fixture base (5).
3.
Remove holding fixture (1) from transmission (2).
FOLLOW-ON TASKS:
l Install transmission and torque converter, (See paragraph 5-12)
5-67
