TM 9-2320-289-34
5-12.
TRANSMISSION AND TORQUE CONVERTER MAINTENANCE (Con’t).
CAUTION
Ensure that transmission (1) is tilted backwards to prevent torque
converter (16) from falling out of transmission when transmission is
removed, Failure to follow this caution may result in damage to torque
converter,
8 .
Slide transmission (1) straight back off 2 locating pins (17). Lower transmission and remove.
9 .
Remove torque converter (16) by pulling straight out of transmission (1).
b.
CLEANING AND INSPECTION
WARNING
Dry cleaning solvent P-D-680 is toxic and flammable. Always wear
protective goggles and gloves and use only in a well-ventilated area. Avoid
contact with skin, eyes, and clothes and DO NOT breathe vapors. DO NOT
use near open flame or excessive heat. The solvent’s flash point is
100°F-138°F (38°C-59°C). if you become dizzy while using cleaning
solvent, immediately get fresh air and medical help. If solvent contacts
eyes, immediately wash your eyes with water and get medical aid.
1.
Clean transmission case and all attaching hardware with dry cleaning solvent.
2 .
inspect transmission case for signs of leakage and damage. If there is leakage or damage,
transmission case must be replaced.
3.
inspect all seals and fittings for signs of leakage. See appropriate paragraph if any of these
conditions exist.
TA50244
5-60
