TM 9-2320-289-34
5-12.
TRANSMISSION AND TORQUE CONVERTER MAINTENANCE.
This task covers:
a .
Removal
c. Installation
b. Cleaning and Inspection
INITIAL SETUP:
Equipment Condition
l
l
l
l
l
Transmission oil pressure testing completed.
(See paragraph 5-11)
Transmission hydraulic fluid drained and oil
pan loosely installed. (See TM 9-2320-289-20)
Transfer case and adapter removed.
(See paragraph 5-21 or 5-22)
Transmission linkage disconnected,
(See paragraph 5-2)
Transmission oil cooler SUpply and return
pipes disconnected, (See paragraph 5-4)
General Safety Instructions
Materials/Parts
l Dry cleaning solvent
(Item 23, Appendix B)
ToolslTest Equipment
l Torque wrench
Personnel Required
l MOS 63W (2)
Manual References
l TM 9-2320-289-20
l Transmission and torque converter are heavy, Use caution and provide support during removal
and installation.
l Dry cleaning solvent is flammable and must not be used near open flame. Use only in a
well-ventilated area.
CAUTION
Transmission (1) should not be removed with transfer case and adapter
installed. Failure to follow this caution may result in damage to
transmission case,
1.
Remove screw (4) and wiring harness
clip (5), and disconnect engine wiring
harness connector (3) from downshift
electrical
connector
(2)
in
transmission (1).
TA50240
5-56
