5-10. FRONT SERVO ASSEMBLY MAINTENANCE

/.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual
Page Navigation
393

TM 9-2320-289-34 5-10. FRONT SERVO ASSEMBLY MAINTENANCE. This task covers: a. Removal d, Assembly b. Disassembly e. Installation c. Cleaning and Inspection INITIAL SETUP: Equipment Condition Materials/Parts • Control valve spacer plate and check balls l One oil seal ring removed. (See paragraph 5-7) l Dry cleaning solvent (Item 23, Appendix B) l Hydraulic fluid (Item 40, Appendix B) General Safety Instructions l Dry cleaning solvent is flammable and must not be used near open flame. Use Only in a well-ventilated area. a. REMOVAL 1. Remove front servo piston assembly (3) from bore in transmission case (1). Remove front servo spring (2). TA50235 5-49

Privacy Statement
Press Release
Contact