TM 9-2320-289-34
5-9.
REAR SERVO ASSEMBLY MAINTENANCE (Con’t).
f.
INSTALLATION
1.
Install rear accumulator spring (5) and rear servo assembly (3) in bore.
2.
Push down on rear servo assembly (3) to ensure that it is properly seated. Install new servo
cover gasket and rear servo cover (1) with 6 bolts (2). Tighten bolts to 216 lb.-in. (24 N.m).
FOLLOW-ON TASKS:
l install control valve assembly. (See paragraph 5-7)
TA50234
5 - 48
