TM 9-2320-289-34
4-6.
INSTRUMENT PANEL WIRING HARNESS AND EXTENSION REPLACEMENT
(Con’t).
4.
At lower part of steering column (1), disconnect directional signal connector (27), ignition
switch connector (28), back-up light switch connector (26), and dimmer switch connector
(29) ,
5.
Inside
engine
compartment,
disconnect wiring harnesses from
rear of fuse box (22).
6 .
Remove turn signal flasher from fuse
box. Remove 2 screws (30) and bolt
(31 ), and pull out fuse box (22). Wipe
grease from exterior of fuse box if
instrument panel wiring harness will
not be replaced.
TA50808
4-40
