TM 9-2320-289-34
3-45.
FUEL INJECTOR PUMP CALIBRATION (Con’t).
10.
Set mechanical light load advance as
follows:
(a)
(b)
(c)
Perform
paragraph 3-39,
INSTALLATION, step 10.
Place throttle lever (17) in wide
open throttle position. Rotate
face cam (19) to maximum lift
position in contact with cam
roller (23) on rocker lever (21).
Set rpm at 2000. Adjust position
of servo adjusting screw (22) to
obtain 0.5-1.5 degrees cam
advance indication on throttle
advance gage (13).
3-167
