M 9-2320-289-34
3-20. CAMSHAFT INSTALLATION.
This task covers:
a. Installation
INITIAL SETUP:
Equipment Condition
Materials Parts
• Camshaft removed. (See paragraph 3-12)
l Molybdenum grease
(Item 37, Appendix B)
l Lubricating oil (Item 49, Appendix B)
Tools/Test Equipment
• Torque wrench
a .
INSTALLATION
CAUTION
Care should be taken during installation of camshaft (3) into engine block
(4). Failure to follow this caution may result in damage to camshaft
bearings,
NOTE
If Installing new camshaft (3), ensure that molybdenum grease Is applied
to camshaft lobes (6).
1. Apply light coat of engine oil to camshaft journals (5 and 7) and vacuum pump drive gear.
Install camshaft (3) in engine block (4). Install ring (8), camshaft sprocket key (9), and plate
(2) with 2 bolts (1). Tighten bolts to 20 Ib.-ft. (27 N.m).
TA50674
3 - 6 6
