TM 9-2320-289-34
3-22. TORSIONAL DAMPER AND CRANKCASE COVER INSTALLATION.
This task covers:
a. Installation
INITIAL SETUP:
Equipment Condition
Materials/Parts
l Torsional damper and crankcase cover
l
removed. (See paragraph 3-10)
l
l
Tools/Test Equipment
l
l Torque wrench
l
One crankcase cover seal
One fuel injector pump gasket
Lubricating oil (Item 49, Appendix B)
RTV sealant (Item 57, Appendix B)
Anaerobic sealing compound
(Item 59, Appendix B)
General Safety instructions
l Avoid skin contact with anaerobic sealing compound.
a. INSTALLATION
WARNING
Avoid skin contact with anaerobic sealing compound. immediately wash
off skin if contact is made. Failure to follow this warning may result in
injury to personnel.
NOTE
l if installing crankcase cover seal (7), perform steps 9 and 10.
l if installing torsional damper, perform step 10.
1. Install probe holder (9) on crankcase
cover (4) with 2 screws (10) if
removed.
T A 5 0 6 7 6
3 - 6 9
