TM 9-2320-289-34
3-16. CAMSHAFT BEARINGS REMOVAL (Con’t).
3.
Install nut (5) and thrust washer (4) on puller screw (6), Index front camshaft bearing pilot (3) to
front camshaft bearing, and install puller screw through front camshaft bearing pilot,
NOTE
l Ensure that shoulder of pilot (7) is toward camshaft bearing and that at
least 2 threads are exposed at end of puller screw (6).
l Ensure that 3 inner camshaft bearings are removed first. Front and rear
camshaft bearings will act as guides for camshaft bearing puller.
4.
Install correct pilot (7) to remove 1 inner camshaft bearing. Hold end of puller screw (6) while
turning nut (5) until inner camshaft bearing is removed, Repeat this step until other inner
damaged camshaft bearings are removed. Discard camshaft bearings.
T A 7 0 1 8 4 6
3-54 Change 2
