TM 9-2320-289-20
11-35. REAR DOOR FRAME AND PANEL ASSEMBLY REPLACEMENT (M1008 AND
M1008A1) (Con’t).
6.
7.
8.
9.
10.
Position rubber strip (22) at angle bracket (28). Install right side panel assembly (6) with 2
bolts (21) into 2 nuts (25). DO NOT fully tighten bolts. Install air vent (20) on right side panel
assembly with 2 bolts (19),
Install screw (26), 2 washers (27), and nut (30) through bottom of right side panel assembly
(6) into molding (29).
Install screw (24), washer (23), and extended nut (17) through top of
assembly (6) into panel assembly (18). DO NOT fully tighten extended nut.
Tighten 2 bolts (21) and extended nut (17).
NOTE
right side panel
Use an assistant to support door frame assembly (7) during installation.
Install door frame assembly (7) with 2 screws (8), 4 washers (2), and 2 nuts (1). DO NOT fully
tighten nuts.
TA50147
11-136
