TM 9-2320-289-20
11-35. REAR DOOR FRAME AND PANEL ASSEMBLY REPLACEMENT (M1008 AND
M1008A1) (Con’t).
b.
INSTALLATION
1.
2.
3.
4.
5.
NOTE
If installing molding (36), perform steps 1 and 2.
If Installing molding (29), perform steps 3 and 4.
If installing left or right side panel assembly (6), perform steps 1-10.
If installing door frame assembly, perform steps 11-16.
Install 5 expansion shields (35) if removed.
Install 2 gaskets (37) into molding (36). Install molding with 5 bolts (38).
Install molding (29) to cargo floor with 4 bolts (31), 8 washers (33), and 4 nuts (34).
Install 3 screws (32) through center of molding (29).
NOTE
Left and right side panel assemblies (6) are installed the same way. Use an
assistant to support side panel assemblies during installation.
Install 2 nuts (25) into right side panel assembly (6) if removed.
TA50146
11-135
