TM 9-2320-289-20
11-21. CARGO COMPARTMENT HEATER AND FUEL FILTER MAINTENANCE (M1008
AND M1008A1).
This task covers:
a.
Removal
c. Assembly
b. Disassembly
d. Installation
INITIAL SETUP:
Equipment Condition
Materials/Parts
• Heater shield, control box, and lead removed.
• Seven locknuts
(See paragraph 11-20)
• One gasket
• Communications rack mounting hardware
• TWO cotter pins
and ground strap removed (M1008A1 only).
• RTV sealant (Item 41, Appendix C)
(See paragraph 4-48)
Personnel Required
General Safety Instructions
• MOS 63B (2)
• DO NOT perform this procedure near
fire, flames, or sparks.
a. R E M O V A L
WARNING
Diesel fuel is flammable. DO NOT perform this procedure near fire,
flames, or sparks. A fire extinguisher must be on hand in work area.
Failure to follow this warning may result in serious injury or death.
NOTE
Use suitable container to catch fuel from disconnected fuel line.
1.
Close fuel shutoff valve (2). Loosen fitting (1) and disconnect fuel line.
2.
Loosen clamp (4), disconnect air duct hose (3) from ventilator (6), and move air duct hose
out of the way.
TA50098
11-72
