TM 9-2320-289-20
11-20. CARGO COMPARTMENT HEATER CONTROL REPLACEMENT (M1008 AND
M1008A1).
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Equipment Condition
Materials/Parts
• Both battery negative cables disconnected.
• Four locknuts
(See paragraph 4-38)
a.
REMOVAL
NOTE
• If removing control box (7), perform steps 1 and 2.
• If removing lead (4), perform steps 1-3 as required.
1.
2.
3.
4.
Open catches (2) and remove heater
shield (1).
Disconnect lead (4) from control box (7). Disconnect control box plug from heater wiring
harness. Remove 2 nuts (3) and control box.
NOTE
Note clamp locations for installation.
Remove 2 screws, washers, and clamps from lead (4), Disconnect lead from cargo
compartment heater (6).
Remove 2 locknuts (14), washers (13), and bolts (8). Remove upper bracket (5). Discard
locknuts.
TA50096
11-70
