TM 9-2320-289-20
11-20. CARGO COMPARTMENT HEATER CONTROL REPLACEMENT (M1008 AND
M1008A1) (Con’t).
5.
Remove 2 locknuts (9), washers (10), and bolts (11). Remove lower bracket (12). Discard
locknuts.
b.
INSTALLATION
NOTE
• If installing iead (4), perform steps 2-4 as required.
• If installing control box (7), perform steps 3 and 4.
1.
Install lower bracket (12) on cargo compartment heater (6) bracket with 2 bolts (11), washers
(10), and new locknuts (9). Install upper bracket (5) on lower bracket with 2 bolts (8), washers
(13), and new locknuts (14).
2.
Connect iead (4) to cargo compartment heater (6). install 2 clamps on lead. Install clamps on
cargo compartment heater with 2 washers and screws.
3.
Install control box (7) on upper bracket (5) with 2 nuts (3). Connect lead (4) to control box.
Connect control box plug to heater wiring harness.
4.
Install heater shieid (1) over cargo compartment heater (6) and lock 2 catches (2) in place.
FOLLOW-ON TASKS:
• Connect both battery negative cables. (See paragraph 4-38)
• Check operation of cargo compartment heater. (See TM 9-2320-289-10)
TA50097
11-71
