11-12. CAB HEATER COOLANT HOSES REPLACEMENT

11-12. CAB HEATER COOLANT HOSES REPLACEMENT (Cont) - TM-9-2320-289-20_678

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
656

TM 9-2320-289-20 11-12. CAB HEATER COOLANT HOSES REPLACEMENT. This task covers: a. Removal b. Installation INITIAL SETUP: Equipment Condition • Rear battery box removed. (See paragraph 11-6) • If removing • If removing NOTE outlet hose components, perform steps 1-3. inlet hose components, perform steps 4 and 5. • Drain coolant from hoses into suitable container. • Tag hoses for installation. 1. Loosen clamp (2) and disconnect engine coolant heater hose (3) from pipe assembly (6). Loosen clamps (8) and disconnect hose (1) from pipe assembly and radiator (7). TA50077 1 1 - 47

Privacy Statement
Press Release
Contact