TM 9-2320-289-20
7-4.
PARKING BRAKE CABLE REPLACEMENT (Con’t).
NOTE
Only M1009 has a cable guide (14).
6.
Depress finger clip (13) and disconnect left rear parking cable (6) from connector (15).
Depress tabs on finger clip (10) and pull cable through bracket (11) to remove. Remove
equalizer (9) and grommet (12) from left rear parking brake cable as required. Remove cable
guide (14) as required.
b.
INSTALLATION
1.
2.
3.
4.
5.
6.
7.
• If installing
• If installing
• If installing
NOTE
left rear parking brake cable (6), perform steps 1 and 3.
right rear parking brake cable (2), perform steps 2-4.
front parking brake cable (16), perform steps 5-7.
• Only M1009 has a cable guide (14).
Install cable guide (14) if removed. Push left rear parking brake cable (6) through cable guide
and bracket (11) with grommet (12) installed in bracket. Install left rear parking brake cable
through equalizer (9) until finger clip (13) snaps in place. Connect left rear parking brake cable
to connector (15).
Install clip (1) with bolt (21 ) or clip (3) with bolt (4), Position right rear parking brake cable (2).
Push rear parking brake cable (2 or 6) through backing plate (7) until finger clip (5) snaps in
place and connect to parking brake lever.
Install equalizer nut (8).
Install grommet (18) on bracket (17) if removed. Push front parking brake cable (16) through
bracket. Push front parking brake cable through hole in cab. Pull through from underneath
truck until finger clip (19) snaps in place.
Position front parking brake cable (16) with left rear parking brake cable (6). Install connector
(15) if removed.
Press parking brake cable grommet (20) into place on cab floor.
FOLLOW-ON TASKS:
• Install brake drum if removed. (See paragraph 8-5)
• Connect parking brake cable at parking brake pedal assembly if disconnected. (See
paragraph 7-3)
• Adjust parking brake cable. (See
• Remove wheel chocks.
• Check parking brake operation.
paragraph 7-2)
7-7/(7-8 blank)
