TM 9-2320-289-20
7-3.
PARKING BRAKE PEDAL REPLACEMENT (Con’t).
4.
Depress tabs on finger clip (3) and
disconnect parking brake cable (4)
from parking brake assembly clip (2).
Remove parking brake assembly (1).
b.
INSTALLATION
1.
2.
3.
4.
Push finger clip (3) through parking
brake assembly (1). Connect parking
brake cable (4) to parking brake
assembly clip (2).
Install parking brake assembly (1)
with
studs
through
engine
compartment wall using 2 washers
(5) and nuts (6).
Install new Iockwasher (7) and bolt
(11).
Install grommet (12) on instrument
panel and pedal cover (14) on pedal
if removed. Push release handle rod
(10) through grommet. Install parking
brake retainer (9) on parking brake
lever (8) if removed and connect
release handle rod to parking brake
retainer.
FOLLOW-ON TASKS:
• Adjust parking brake cable. (See paragraph 7-2)
• Install parking brake switch. (See paragraph 4-17)
• Remove wheel chocks.
TA49658
7-4
